Model: Adapter CP1232-5A
1. 60V izlazna kutija za UPS napajanje (ne dolazi sa UPS-om)
2. Izlazni napon i struja: DC12V 5A
3. Opseg ulaznog napona: 220VAC
4. Ugrađen EMI filter sa malim talasima
5. 100% test sagorevanja pri punom opterećenju
6. Vazdušno hlađenje
7. Zaštita: kratak spoj/preopterećenje/prenapon/previše temperatura
8. Ugrađeno konstantno strujno ograničavajuće kolo (C.C.+C.V.mode);
Specifikacije:
| Model |
CP1232-5A |
| Output |
DC output Voltage |
12V±10% |
| Output Current Range |
0-5A |
| Wave and Noise |
120mVp-p |
| DC output Power |
60W |
| Efficiency |
85% |
| DC Voltage Adjustable Scope |
（at full load）≦0.5% |
| Input |
Voltage Range |
220VAC 50Hz |
| Input Current |
0.07A/230V |
| Leakage Current |
<1mA/ 240VAC |
| Inrush Current |
Cold start 20A/120VAC, 40A/230VAC |
| Protection |
Over-load |
105%~135%, Protection type: Constant current limiting,
recovers automatically after fault condition is removed |
| Over-voltage |
105%---150% Rated Voltage, Protection type: Shut off |
| High-temperature |
RTH3>=65°C FAN ON<=55°C FAN OFF>=80°C Cut off output(5~15V) |
| Environment |
Working temperature and humidity |
-10°C~+50°C, 20~90%RH |
| Store temperature and humidity |
-20°C~+85°C, 10~95%RH |
| Temperature coefficient |
±0.03%°C(0~50°C) |
| Vibration |
10~500Hz,2G 10min./1cycle,Period for 60min,EACH AXES |
| Safety |
Withstand voltage |
I/P-O/P: 1.5KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC |
| Isolation resistance |
I/P-O/P,I/P-FG,O/P-FG: 100M Ohms/500VDC |
| Standard |
CE EMC Standard |
EN55015:2013+A1:2015, EN61547:2009, EN61000-3-2:2014, EN61000-3-33:2013 |
| CE LVD Standard |
EN61347-2-13:2014+A1:2017, EB61347-1:2015 |
| ROHS Standard |
IEC 62321: 2013, EPA3050B:1996, EN1122:2001, EPA3052:1996, EPA3060A, etc. |
| Other |
Dimension |
165*205*74mm (L*W*H) |
| Weight |
1,58kg |
| |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. I/P-O/P: Input and output interval, I/P-FG: Input and enclosure, O/P-FG: Output and enclosure |
